463260108 • 19
C
Sideburner
cap clip
12
First, attach tank heat shield and shield extension together with two
#8-32x3/8”
screws,
4mm
flat washers,
4mm
lock
washers and
#8-32
hex nuts. Inside of cart, insert rear shield tabs into two left slots between upper and lower back panels.
Attach left front shield tab under front brace with
#8x3/8”
self-tapping screw. Insert left and right grease tray rails into slots
beneath grease tray opening in upper back panel. Attach left rail to brace, with a
#8x3/8”
self-tapping screw. Attach right rail
and right front shield extension tab together under front brace with a
#8x3/8”
self-tapping screw.
Some components not shown for
illustration purposes.
Tank heat shield
Tank heat shield extension
#8-32x3/8”
Screw
#8-32 Hex nut
4mm Lock washer
4mm Flat washer
11
Under sideburner shelf, attach sideburner ignitor wire to electrode
(A)
Place burner cap onto sideburner
. Attach sideburner cap clip
(C)
. Place sideburner cooking grate onto sideburner shelf,
aligning grate legs with holes in shelf.
(B)
Burner cap
Sideburner cooking grate
Sideburner Ignitor Wire
A
B
Sideburner
cap clip
Front of shield - three tabs.
Left grease
tray rail
Right grease
tray rail
Front brace
#8x3/8” self-
tapping screw
