16
17
2
1
Attach both doors using one
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart right
Insert AA battery into ignition module, negative (
–
) end first. Then put on the cap, shown
B
.
ignition module. Total (2) connections, shown
C
.
module. Total (5) connections. Connect the two wires (A and B) from the switch wiring harness into the back of the electronic
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the electronic ignition
side panel with the nut, shown
A
.
#8x3/8”
self-tapping screw and four
#8-32x3/8”
flat head screws each side.
+
-
ignition module
Electronic
Heat shield
Nut
Cap
wire
NOTE: Switch terminals are larger than electrode
terminals and should only be installed in
location shown as A, B.
AA battery
Right side panel
A
B
C
1
2
3
A
B
4
5
#8x3/8”
self-tapping
screw
#8-32x3/8”
flat head
screws
