Upper back panel
6
5
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
1
5
Insert flange on right side shelf into side shelf brackets on side of firebox, shown
A
.
Attach rear of shelf using one
1/4-20x3/4”
screw,
7mm
lock washer,
7mm
washer and
1/4”
nut in upper hole; using one
flat
1/4-20x1½”
screw,
7mm
lock washer
and
7mm
flat washer in lower hole, shown
B/C
.
two
Attach front of shelf and fascia using
1/4-20x3/4”
C/D/E.
screws,
7mm
flat washers,
Unscrew
#8x3/8”
self-tapping screw attached in lower front of shelf. Re-install
#8x3/8”
self-tapping screw with large
washer, shown
this screw with one large washer, shown
F
.
7mm
lock washers and
1/4”
nuts, and one
On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one
1/4-20x1½”
screw,
7mm
lock washer, and
7mm
flat
washer on each side.
Do not fully tighten screws until side shelf
installation is complete in later steps.
A
B
C
D
E
F
1/4-20x1½” screw
1/4-20x3/4” screw
1/4-20x3/4” screw
#8x3/8” tapping
screw
#8x3/8” tapping
screw
large flat
large flat
washer
washer
Front of Shelf
1/4-20x3/4”
screw
7mm lock
washer
7mm lock
1/4”nut
1/4”nut
1/4”nut
washer
7mm lock
washer
7mm lock
washer
7mm flat
washer
7mm flat
washer
7mm flat
washer
7mm flat
washer
