Char-Broil 140779, Manual

Page: 4 / 24

4
3
- Remove the electrode from the burner, if equipped. Shown Figure A.
- Some burners have electrode as shown in figure B. Remove two screws that secure each Electrode to Tube Burner (Electrode remains in
Firebox).
- Lift back end of burner while sliding Tube Burner out of Firebox, disengaging burners from Valves.
Front of Grill Firebox
Tube Burner
Valve
Tube Burner
Tube Burner Replacement (Con’t.)
4
- Slide Adjustable Burner Inlet into Adjustable Burner End. Using your existing burner as a guide, slide the Adjustable Burner Inlet in or out until it
matched your existing burner length as shown in illustration below..
- Ensure the burner port holes are lined up as shown in illustration below.
- Screw Thumbscrew into tab at the top of Adjustable Burner End and tighten securely.
BURNER PORT HOLES
MUST BE LINED - UP
THUMBSCREW
ADJUSTABLE BURNER
INLET
ADJUSTABLE BURNER
END
NO!
YES!
Electrode
A
Electrode
Tube
Burner
Screws
B