With the aid of a helper, turn the
bottom shelf so that the flange is up,
and attach to inside holes near ends of
legs using four
and
.
1/4-20x2” screws
1/4-20 flange nuts Do not fully
tighten screws until Step 5 is
complete.
2
1
First, pick a suitable location to work. Open the carton and slit the corners. This will give you a protective work surface upon which
to start the assembly. During assembly, refer to page 10 for hardware identification.
Stand bottom assembly on end. Attach legs to one end using two
and
per leg.
Turn assembly upside-down to attach remaining two legs on opposite end.
1/4-20x2” screws
1/4-20 flange nuts
Do not fully
tighten screws until Step 5 is complete.
Bottom assembly
Leg
Bottom shelf
