5
6
Insert a small
Hitch Pin Clip
into the hole at one end of the
axle
and bend the ends of the pin back so that it cannot be removed.
Slide a
wheel
onto the
axle
. Slide the axle through the holes at the ends of the short legs. Slide the remaining
wheel
onto the axle
and secure with the remaining
Hitch Pin Clip
.
Finally, Push the
wheel end caps
onto each end of the
axle
.
Place the
firebox
onto the
cart
. The
butterfly
damper
should be on your right hand side over
wheels. Insert 4 each
1/4-20X1 3/4" screws
through cart and firebox. Secure the
firebox
using 4 each
1/4-20 flange nuts
. Insert screws
from outside, flange nuts from inside chamber.
FULLY TIGHTEN ALL SCREWS AND NUTS
AT THIS TIME.
Wheel End Cap
1/4-20 Flange Nut
1/4-20x1 3/4" Screw
Page 10
“
Cone” side of wheel against leg
Small Hitch Pin Clip
Small Hitch
Pin Clip