8
7
Insert Vent Knob into side of Grill Lid from the outside. Inside the Grill Lid, slide the Vent Plate with the flat washer
facing outside the grill lid onto the Vent Knob stud. Next, place the Wavy Washer on the stud and secure with a
#1/4-20 Jamb Nut. Tighten just enough to allow the Vent Plate to slide freely from front to back. Repeat on the other
side of the Grill Lid.
Attach 2 Upper Hinge Assemblies to the rear of the Grill Lid using 4 each 1/4-20x1-5/8” Screws and 4 each 1/4-20
flange nuts.
Vent Knob
Vent Plate
Wavy Washer
Jamb Nut
Note:
The vent plate assembly has a flat
washer welded to it. Be sure to assemble
the vent plate with the flat washer facing
the exterior of the lid.
Note:
The flat washer must be installed
toward the outside of the grill for the vent
plate to function properly.
