3. Standby button options
Standby Touch Sensor
a.
Mute
You can put the unit into “MUTE” mode by pressing the
STANDBY touch sensor button for less than 2 seconds.
The unit will indicate “MUTE” status by turning on both the
RIGHT and LEFT RED lights on the units’ front panel.
b.
Standby
You can enter and exit “STANDBY” mode by pressing and
holding the STANDBY touch sensor for more than 2 seconds.
Touch Sensor Operation
The Qube Reference 500M uses state of the art QPROX
TM
touch sensor technology first developed by QPROX
TM
for the
Apple iPod.
Apple iPod.
For the most reliable operation, during initial cold power on
(i.e. mains power on) and after release from “STANDBY”
mode, the unit will perform a calibration of the touch sensors
to compensate for any noise in the units’ external environment
(either electrical or radiated). This may cause the sensors to
become unresponsive during this time. Please allow the
calibration cycle to complete to ensure reliable operation.
If any button is pressed and held for more than 60 seconds
this will also automatically trigger the above calibration
process.