1. Left touch sensor options
a.
Front LED brightness control
To change the brightness of the front panel and standby panel
blue lights, press and hold the LEFT touch sensor strip on the
blue lights, press and hold the LEFT touch sensor strip on the
front panel for 4-5 seconds until the front panel lights start to
flash.
After the lights finish flashing, press and hold the left touch sensor
strip to lower the brightness level or press and hold the right touch
sensor strip to raise the brightness level to the desired level.
Once you are happy with the brightness level, simply wait for 5
seconds and the front panel lights will flash again for 5 seconds to
confirm the change.
b.
Internal LED brightness control
To change the brightness of the internal blue lights, first put the
unit into “MUTE” mode by pressing the “STANDBY” button on the
top panel for less than 1 second.
The RED lights in both front panel touch sensor strips will
The RED lights in both front panel touch sensor strips will
illuminate to indicate that the unit is in “MUTE” mode.
Next press and hold the LEFT touch sensor strip on the front
panel for 4-5 seconds until the Internal lights start to flash.
After the lights finish flashing, press and hold the left touch sensor
strip to lower the brightness level or press and hold the right touch
sensor strip to raise the brightness level to the desired level.
Once you are happy with the brightness level, simply wait for 5
seconds and the Internal lights will flash again for 5 seconds to
confirm the change.
Left Touch Sensor Strip