Page 13
Attachment
Before Attaching the Machine
Before attachment, ALWAYS ensure the following:
- All safety guards & decals are in good working order and correctly fitted
- Lubrication points have been lubricated as per scheduled maintenance period
- The tyres are free of damage and inflated to the correct pressure
- Electrical connections are free of dirt and moisture
Attaching the Machine
NOTE: This machine is designed to attach to the towing vehicle through a 50mm diameter ball hitch.
1.
Reverse the towing vehicle up to the machine.
2.
Attach the machine onto the towing vehicle’s coupling.
3. Attach the control cable to the control socket fitted on the towing machine, ensuring a secure connection.
WARNING: ENSURE CONTROL EQUIPMENT IS SECURELY ATTACHED TO THE TOWING
VEHICLE BEFORE USE!
4. If required, check and adjust the drop size to suit the material being distributed.
1.
Wire Plug
a.
Wire Plug supplied with kit – cut approx. 30mm of outer sheath off and shorten BROWN
cable by 8mm. Wiring Code:
i.
Brown = 7 = Motor –
ii.
Red = 3 = Motor +
iii.
Green = 5 = Sensor Brown Cable
iv.
White = 1 = Sensor White Cable.
b.
2x 40mm lengths of black heat shrink tubing will be required as the plug is designed for a
larger cable diameter than is being used on these machines, so 2 pieces of heat shrink must be
heat shrunk onto the cable at the right point to allow the cable grip to function!