Page 14
Rear Roller (Optional)
The rear is an optional fitment specifically designed for use with advanced surfaces
such as CLOPF, Turf float and other fibre-stabilised surfaces. The roller works well on
any arena type, consolidating and ‘firming’ the surface, to give a true one-pass finish
for busy liveries & riding schools. A useful attachment which save you the expense of
a separate roller & the hassle of changing implements regularly.
There are three operating modes:
-
No roller. This mode is used when drawing material in from the edge boards, or
when a firmed surface is not desired. The machine locks in this position with the use
of two clips, for transportation & storage. *Note: This places a considerable negative
load on the ball hitch. TAKE CARE when unhitching the machine in this configuration.
-
Following roller. This mode is used so that the roller is following both the spring
tines & blades. This is the primary mode of use, giving an agitated, level and firmed
surface in one pass.
