PAGE
19
●
Channel Switch
Use the number buttons to choose the desired channel directly or press
【
CH+
】
/
【
CH-
】
on the panel or
【
P
+
】
/
【
P
-
】
on the remote control to select the channel number. If a channel
number is in SKIP ON mode, the next channel will be displayed.
A maximum of
2
digits can be keyed in at one time, the number button on the remote
control is used. The symbol of
“
- -
”
on the upper-right corner represent tens and one
respectively. The range is 0
～
99. The first input number is for tens, if it is
“
1
”
,
“
1-
”
appears
on screen. The TV will switch to channel 1 if no additional number is keyed in within 3
seconds. Alternatively, press
【
OK
】
to switch to the desired channel after the corresponding
number is keyed in.
Note: This function is only available in TV mode
●
Sleep Function
Press
【
SLEEP
】
on the remote control once to
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This is will be reflected in
the top right hand corner of the screen. After this step
is done, press
【
SLEEP
】
to view the set sleep. See the
illustration in the right.
Sleep 30
●
Indicator Light
Status Light
Color
Description
On/Off Off
The TV works normally/is power
off
Standby
Red
In Standby Mode
Timer On/Off Or Sleep
Green
Timer On/Off is valid or Sleep is
on
Sleep (PC)
Yellow
Sleep for power-saving;
Receives signal from
the remote control
Flickering
The indicator will flicker when the
TV receives signal from the
remote control