PAGE
16
Swap between two programs and their
channels. This can be done by pressing
Switch button after two different channels are
selected.
●
Program
Display the current program’s channel
number
●
Name
Rename the program with four colored
buttons on the remote control
【
Red
】
for Capitalized English letters
【
Green
】
for Alphanumeric numbers from 0 to 9
【
Yellow
】
for special characters as
“
#
”
【
Blue
】
Resuming
“
*
”
in unnamed mode
Use
【
V+
】
/
【
V-
】
to input and select the characters
Note:
In PC signal mode, there are 2 options of Language and Child Lock in the Setup
menu. In AV/RGB/YPbPr signal mode, there are 3 options of Language, Blue Back and
Child Lock.
Ⅳ
Tune
Press
【
P+
】
/
【
P-
】
to select the Tune menu. There
are altogether 7 items to adjust: Auto Search,
Search, Band, Fine Tune, Color System, Sound
System and Skip.
●
Auto Search
In Auto Search mode
1. The TV does auto-search and stores
programs from VHF-L to UHF.
2. During search, all programs searched are automatically stored.
3. When the search is done or when all 100-program positions are occupied, or you
have pressed
【
MENU
】
during the search process, the search will halt and the TV will
return to the Tune menu with channel 0.
●
Search
In Search mode, press
【
V+
】
/
【
V-
】
so that the TV manually searches the lower or upper
program position until one program was searched and automatic storage will commence. If
the program is not needed, then press
【
V+
】
/
【
V-
】
again. After pressing
【
MENU
】
, the TV
will exit from Search and return to the menu.
●
Band
To set which band the current program belongs to.
●
Fine Tune
In Fine Tune mode, press
【
V+
】
/
【
V-
】
to until the best picture and sound is achieved. After
adjusting, the TV will auto-store the channels. Press
【
MENU
】
to exit and return to the Tune
menu.