FLW-717C Product Manual
Shenzhen City Chang Rui Technology Co., Ltd
1. Let's make sure the communication settings correctly, do the basic control
。
2. Have administrator privileges to access this area from the control software to adjust the image adjustment options.
3. After the first switch all screens into a unified channel, giving the best signal for the whole screen white field signal.
4. Rationale first find a reference screen on the mosaic screen, and then the rest of the screen with a reference color temperature is adjusted to the
same screen, So as to achieve consistent color temperature effect results.
5. A
djusted for use: First, determine whether the non-reference screen model is consistent with the reference screen, and then determine
whether the screen backlight brightness to reach agreement with the reference screen, if not you can debug brightness backlight brightness or
brightness, contrast parameters equivalent to as close to the base screen brightness. Then prepare to adjust the color temperature of the
non-reference screen, first in the color table to quickly select and color similar to the color of the reference screen, and then manually adjust the
color temperature of the gain / compensation of red, green and blue (gain mainly affects bright field, try to adjust the gain under the white field
the RGB values; compensation mainly affects dark field), by fine-tuning reach base screen color consistent so far. Note: Positive reconcile
anti-tune the color corresponding to the color table is the opposite, ie positive tone screen colors and swatches of color is consistent, anti-tune the
screen colors and swatches is the opposite, the default is the anti-tune settings Also you can pay attention to hover over the color table value
corresponds to the block, this value shows the principle of complementarity of red, green and blue Huang Ziqing.
Automatic adjustment
：
Under VGA channel, the system automatically adjusts the image color and display position.
Note: "Automatic adjustment" process takes about 3-6 seconds, please click, not by other operations or turn off the power.
This machine reset
:
Click this button to display unit, it will adjust the parameters of the selected area, said all restored to factory condition.
Note: "This machine reset" process takes about 3-4 seconds, please click, not by other operations or turn off the power.
For VGA signal, you can manually adjust the second page (special adjustment) of parameters
