3
©2017 Hubbell Incorporated | Chance
®
Voltage Indicator Tester Operating Instructions
Product Safety
The equipment covered in this manual must be used and serviced only by competently trained
personnel familiar with and following approved work and safety practices. This equipment is for
use by such personnel and this manual is not intended as a substitute for adequate training and
experience in safe procedures for this type of equipment.
These instructions neither cover all details or situations in equipment use, nor do they provide for
every possible contingency to be encountered in relation to installation, operation or maintenance.
Should additional information and details be desired or if situations arise which are not covered
adequately for the user’s purpose, the specifics should be referred to Hubbell Power Systems.
!
CAUTION
Function and Design Overview
The CHANCE® Voltage Indicator Tester, model PSC4033582, is a portable device for safely testing
specific models of voltage indicators and the "MAIN" unit of the Wireless Phasing Set. Only use
this device on the indicators listed below. Always test a voltage indicator before and after each use
with either this device or a known energized voltage source. This device tests all components of the
circuitry that are not already tested by the indicator's power-up self-test.
Do
not
use this device near
an energized voltage source.
The Voltage Indicator Tester can only be used on the following devices:
PSC4032915 Full Range Auto-Ranging Voltage Indicator (ARVI)
PSC4032916 Wireless Phasing Set (main unit only) (WPS)
PSC4033710 Multi-Range Voltage Indicator (MRVI)
PSC4033737 Proximity Voltage Indicator (PVI)
Accuracy
This instrument does not verify the calibration of the unit you are testing. Readings may vary
depending upon battery voltage, integrity of connections, and other factors. Testing should be
performed in a safe environment. To avoid erroneous readings, keep the unit as far away as practical
from all system components.