19
Operation
UH330 ADA Control Panel
Operation
1.
Close the door.
2.
Push the dishwasher ON-OFF/DRAIN switch UP to turn the power ON.
3.
The power switch will illuminate and the machine will fill with water. The cycle light
flashes during the fill cycle.
4.
Wait approximately 30 minutes until the wash temperature gauge indicates a minimum of
150ºF/66ºC.
5.
Scrap the wares to remove large food particles.
6.
Load the dish rack into the machine. Wash one dish rack at a time.
7.
The NORMAL cycle setting is the default cycle and does not have a green indicator light.
The normal cycle is approximately 2-1/2 minutes long.
8.
The EXTRA cycle is selected by pushing the cycle button once. The EXTRA green indicator
light will flash for 15 seconds. Pressing the START button before the flashing EXTRA ind-
icator stops flashing starts a
n
EXTRA wash cycle of approximately 2 minutes. The EXTRA
green indicator light will come on. and the green indicator light above the start switch
will
illuminate indicating the machine is in the wash mode.
The illustration below shows the operator controls and temperature displays for the UH330 ADA.
PRIME
DETERGENT
RINSE AID
START
CYCLE
WASH
RINSE
TEMPERATURE
1 8 0
1 5 0
OFF/DRAIN
ON
POWER
NORMAL
EXTRA
HEAVY
Cycle Selector
Push button
Wash Temperature
Digital Display
Final Rinse Temperature
Digital Display
Prime
Push button
Time Select
Lights
Start
Push button
ON-OFF/DRAIN
Power Switch
Cycle Light
Wash Mode
START
CYCLE
EXTRA
HEAVY
NORMAL
Push the Cycle button once for Extra Cycle.
Push twice for Heavy Cycle.
Push the Cycle button three times to cancel
the selection and return to Normal Cycle.
Summary of Contents for UH330 ADA
