![background image](http://html.mh-extra.com/html/champion/sd-10/sd-10_specifications_2588544004.webp)
CONTROL AND
INFORMATION
CENTER
WASH DOWN
SPRAY HOSE
STEAM
EXHAUST VENT
OPTIONAL
EXHAUST FAN
ELECTRIC
ENCLOSURE
RACKS
CONNECTIONS
WEIGHT
SERVICES
120 volt control circuit with push pad operation of “POWER ON,” “STOP” and “SHORT,
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING” for
each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also included to
provide an audible indication of time to unload. A pre-programmed circuit board allows the
push pad to be used as a “DIAGNOSTIC CENTER” by displaying “ERROR CODES” for ease
of troubleshooting. Moisture resistant gauges measure temperature and pressure for recirculated
wash and final rinse. NOTE: Optional NEMA 4X STAINLESS STEEL panel with push button
control and internal adjustable timers is available in lieu of digital push pad operation.
Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled items
and easy cleaning and maintenance of machine.
Steam exhaust vent 6-5/8" I.D., consisting of 16 gauge rolled collar for PVC pipe
connection bolted to the top of the machine. Machine pre-wired with control timer for
the addition of a fan.
Side-mounted exhaust fan constructed for moisture laden air or other air stream
contaminants. Maximum temperature 250°F, 250 CFM @ 3/4" static pressure.
1/10 Hp, 115 volt motor, 1550 RPM.
Electrical control panel is NEMA 12 STAINLESS STEEL or optional NEMA 4X
STAINLESS STEEL with Square “D” components.
Customized to hold your specific items. Standard bakery racks include utensil rack with
hold-down lid and bun/sheet pan insert designed to hold ten pans, constructed of
STAINLESS STEEL rod, mig welded.
Water Inlet: 120°F, 3/4" NPT
Water Drain and Overflow: 1-1/4" NPT
Electrical: Two point connection through knock out on electrical enclosure.
Steam Heating Option: 1/2" NPT
Steam Condensate: 1/2" NPT
Natural or Propane Gas Heating Option: 1/2" NPT, 14" W.C. maximum inlet pressure.
Crated: 800 lbs. Uncrated: 600 lbs.
NOTE: All weights are approximate. Weights will vary depending on the number of
options included with the machine.
120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:
CERTIFICATIONS
UL and UL Sanitation listed (all). CUL Listed (electric and steam only).
SD-10 (8/03)
1Steam Supply: Consumption: 64 lbs./hr. @ 15 psi minimum
2Gas Supply: Consumption: 60,000 BTU/hr. @ 1/2 lb. pressure maximum
Running Amps
Elec. Spec.
208 Volt
3 phase
64
240 Volt
3 phase
56
480 Volt
3 phase
28
14
13
7
14
13
7
Electric Wash
Electric Booster
Steam Wash
1
Steam Booster
Infrared Gas Wash
2
Infrared Gas Booster