SPECIFICATIONS
MODEL SD-10
POT, PAN & UTENSIL WASHER
WASHER
CABINET
DOOR
RECIRCULATING
WASH TANK
WASH TANK
FILTER
WASH TANK
FILL VALVE
WASH TANK
DRAIN VALVE
WASH PUMP
ROTATING WASH
HUB & SPRAY ARM
ASSEMBLY
SANITIZING
RINSE TANK
RINSE SUPPLY
VALVE
FINAL RINSE
PIPING
Automatic washing machine designed to wash all pots, pans and utensils commonly used
in baking and cooking operations.
36" wide x 36" deep x 71 1/8" high. Clearance height: 87 5/8" (96 1/8" with optional infrared
gas heated rinse tank). Door opening: 26" wide x 28 1/2" high. Wash chamber: 24 3/8" wide
x 27 3/8" deep x 28 1/2" high. Constructed of #12, #14 and #16 gauge, type 304 #3 finish
STAINLESS STEEL. All seams tig-welded, cleaned inside, cleaned and buffed outside.
Front-loading, hinged door design for easy loading and unloading. The top half of the
door system rises while the lower half folds down to create a space saving drain table.
Door is interlocked with limit switch to prevent machine operation while door is open.
Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
Heated by two (2) 6 kW 208/240 at 480 volt electric immersion heaters, thermostatically
controlled wash temperature and low water protection system. 25 gallons, 14 gauge
STAINLESS STEEL, sloped to drain. Infrared gas and steam heating options available.
Perforated, STAINLESS STEEL basket type. Double filter system for increased effectiveness
and easy cleaning without emptying wash tank.
Size 1/2" brass material, solenoid type, automatic.
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Wash pump with 5 H.P. ODP motor, (optional TEFC or wash down duty motors available)
208/240 or 480 volt, 3 phase or 1 phase, 60 cycle. Rated for 100 gallons per minute at
35 to 45 PSI. Mounted on #12 gauge STAINLESS STEEL formed channel base. Close
coupled centrifugal pump, bronze fitted with cast iron casing. Optional STAINLESS
STEEL wet end available.
Water driven, STAINLESS STEEL spray arm assembly with STAINLESS STEEL jets,
removable end caps and hand operated quick release mechanism for easy cleaning and
reassembly. Mounted on STAINLESS STEEL base.
STAINLESS STEEL, 6 gallon capacity, with one 6 Kw 208/240 or 480 volt electric booster
heater to provide 180°/190°F hot sanitizing rinse. Uses 2.8 gallons per 22 second cycle.
Infrared gas and steam coil heating options available.
Size 1/2" brass material, solenoid type, automatic.
Type 304 STAINLESS STEEL tubing with brass compression fittings and brass or
optional STAINLESS STEEL full cone rinse jets.
Rev: 8/03