![background image](http://html1.mh-extra.com/html/champion/para-link-201108/para-link-201108_operators-manual_2588920009.webp)
201108 - POwER STATiON PARALLEL KiT
ASSEMbLY AND OPERATiON
9
6. Connect one green and yellow grounding wire from the
parallel kit to each Power Station by securing the ring
terminal of the grounding wire between the nuts of the
Power Stations grounding lug. Tighten the connection with a
wrench.
7. Turn on both Power Stations and power on the AC input side
outlets if applicable.
8. Connect devices to the parallel kit and/or Power Stations
up to the receptacles’ rated amperages. Never exceed the
specified rated capacity of the receptacle.
9. Turn off and unplug connected devices before turning the
Power Stations off.
CAUTiON
Do not exceed the Power Stations wattage rating. Always
connect devices with the largest load first.
NOTiCE
If the parallel kit has been overloaded and the circuit breaker
has been tripped, reduce the load and press the Power Station
reset button to restore power.
NOTiCE
This parallel kit is meant to parallel two ParaLINK compatible
Power Stations together. Both Power Stations must have
ParaLINK parallel receptacles as shown below: