Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661/1556
Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195
Fax: 905/562-4618
(1M) 10/06
Printed in U.S.A.
SPECIFICATIONS
MODEL 2566 CART, CABINET,
RACK AND PAN WASHER
Washer
Automatic washing machine designed to wash and sanitize items commonly
used in the bakery, meat, poultry, candy and food service industries. Machine is
designed to be installed in a pit or used at floor level with a ramping system.
Cabinet
70" wide x 90" deep (100" with pass through option) x 101-1/2" high. Clearance
height: 122" when floor mounted, 108" when used in a pit. Standard door opening:
38" wide x 84" high. Wash chamber: 38" wide x 72" deep x 84" high. Constructed of
12, 14 & 16 gauge, type 304 #3 finish, stainless steel. All seams tig-welded. Seams,
where needed for water tight construction are continuously welded.
Door
Standard right hand or optional left hand swing constructed of 14 and 16 gauge, type
304 #3, stainless steel with integral stainless steel framework. Door double skinned
for added strength. Equipped with door latch and inside release handle. Door is
interlocked with limit switch to prevent machine operation while open.
Washer Floor
Floor constructed of 12 gauge stainless steel formed sheets designed to provide
maximum strength. Floor supports constructed of 2" x 2" x 1/4" stainless steel angle.
Recirculating Wash Tank
Heated by 208/240 or 480 Volt electric immersion heaters, 42 kW total, thermostatically
controlled wash temperature with low water protection system. 180 gallon capacity.
14 gauge stainless steel, sloped to drain. Gas and steam heating options available.
Wash Tank Filter
Perforated,stainless steel baskets. Designed for increased effectiveness and easy
cleaning without emptying wash tank.
Wash Tank Fill Valve
Size 3/4" brass material, solenoid type for automatic.
Wash Tank Drain Valve
Size 2" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Wash Pump
25 H.P., 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 430 gallons per
minute at 40 to 50 psi, mounted on 12 gauge stainless steel formed channel base.
Rotating Wash Hub &
Water driven, stainless steel spray arm assembly with stainless steel jets removable
Spray Arm Assembly
end caps and hand operated quick release mechanism for easy cleaning and
reassembly. Mounted on stainless steel base.
Sanitizing Pumped Rinse
Stainless steel,14 gauge, 60 gallon capacity, supplied with 1-1/2 H.P. pump to provide
Tank
20 gallons of 180°/190° F. hot sanitizing rinse per 30 second cycle at 20 P.S.I.
Thermostatically controlled, low water protected with automatic fill. Available in
electric, gas or steam coil heating.
Final Rinse Piping
Type 304 stainless steel tubing with brass compression fittings and brass or optional
stainless steel full cone rinse jets.
Control & Information Center
120 volt control circuit with push pad operation of “Power On,” “Stop” and
“Short, Medium or Long Wash Cycles.” A digital display indicates “Time Remaining”
for each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A pre-
programmed circuit board allows the push pad to be used as a “Diagnostic Center”
by displaying “Error Codes” for ease of troubleshooting. Moisture resistant gauges
measure Wash Temperature, Wash Pressure and Rinse Temperature.
Optional Rinse Hose
Externally mounted rinse hose with spray gun for easy cleaning and maintenance of
machine.
