![background image](http://html.mh-extra.com/html/champion/elevate/elevate_operating-instructions-and-service-manual_2588651016.webp)
15 OM00ELV8 Rev 3 effective 110118
OPERATING INSTRUCTIONS
Use of the remote control handset
The adjustment of the chair is done by using the handset (Figure 10). The chair moves only as long
as a button of the handset is depressed. The control of the chair makes it possible that more than
one motor is active at any time. Depressing any button is signalled by a LED on the handset.
More than two minutes of uninterrupted pressing of the button should be
avoided!
After 2 minutes of continuous operation of the motors, an 18 minute
pause must be observed.
Rapid adjustment of seated and recumbent positions
The control of the chair makes possible to adjust the entering and bed positions rapidly and easily
by using the handset’s buttons in the
yellow field
.
Trendelenburg position
Adjusting the chair to Trendelenburg position rapidly can be done by using the handset’s button in
the
red field
.
During the rapid adjustments three motors (leg rest, the angle of the seat and the back) work
together. By operating the individual motors separately, we can deviate from the previously
adjusted position.
Adjusting the individual parts of the chair
With the help of the handset, the patient can adjust the chair according to individual comfort
requirements. In order to move the individual part of the chair (backrest, seat tilt, leg rest) use
the▼▲ buttons. The motors of the chair, which
control the movements, automatically switch off
when the end positions are reached.
CAUTION: DO NOT overload chair. Observe the specified maximum weight limit for
the recliner model that you have selected.