Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
44” Single Tank
High Temperature Rack
Conveyor Dishwashing Machine with
Dual Stage Rinse
Model 44 dR
Model
44
d
R
Ra
Ck
Co
N
ve
Y
o
R
oPTIoNS & aCCeSSoRIeS
Tank heat: choice of steam coil, steam injector,
hot water coil
Blower-dryer with 60” hood, table, legs and
pawl bar assembly
Booster Heaters
(completely interplumbed, controls are interwired)
Steam: 40°F - 70°F rise
Electric: 12 kW (40°F rise) (built-in only)
Electric: 22 kW (70°F rise) (built-in only)
Cantilever sideloader (with or without hood)
for 90° load operation
Extended pawl bar (extended drive unit) for use
with load tabling
90° Motorized rack curve (unload)
180° Motorized rack curve (unload)
Racks: peg or flat racks (specify type)
Roller conveyor table (mobile or stationary)
Steam pressure regulating valve (unmounted)
Table limit switch, unmounted (recommended
on all rack conveyor installations)
Vent cowl, stainless steel with 7” stack and
locking damper
Extended vent hood, stainless steel with 7” stack and
locking damper
Water pressure regulating valve (unmounted)
(standard with booster)
Vent fan control
Two-point electrical connection
Water hammer kit
Drain temp kit
Vertical clearance through machine: 24”
(instead of standard 20”) for larger ware
Model MRC 90
90° Motorized
Rack Curve
(Must be ordered with
Roller Conveyor Table)
Cantilever
Sideloader
(No hood)
Model MRC 180
180° Motorized
Rack Curve
(Must be ordered with Roller
Conveyor Table)
Model RCT 64
or RCT 84
Roller
Conveyor Table
