Champion DH-1000 Installation Manual Download

Page: 28 / 80

DH-1000 • How to Maintain your Dishwasher

Daily Maintenance

Keep your dishwasher and the surrounding area spotlessly clean.

Immediately report loose, broken or missing parts to your supervisor.

Check drains for flow restrictions.

Check the dishwasher for leaks.

Operate the dishwasher as explained in this manual.

Monthly Maintenance

Inspect pump hoses, door linkage, springs, and exterior of dishwasher for wear.

Inspect the wash arm bearings and O-rings.

Check the condition of scrap screens,. and dishracks for bent or broken pieces.

Check the toggle switches and indicator lights for damage.

Check the wash pump motor for loud bearings and leaking pump seal.

Create a simple Maintenance Tracking System as a guide for service.

Thoroughly cleaning your dishwasher

every day is very best maintenance

you can do!!

Installation Guide _____________

;

How to Clean your Dishwash

DH-1000

Call your authorized service agent or local service representative and schedule
a complete inspection of your dishwasher by our trained professionals.

A Maintenance Tip -

Schedule

your annual maintenance when you can give the service

agent unrestricted access to the dishwasher for at least 2 to 2-1/2 hours.

Annual Maintenance

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Summary of Contents for DH-1000

















































































Search results

Summary of Contents for DH-1000

Reviews:

Related manuals for DH-1000

Brands by name

Popular brands

Champion DH-1000, Installation Manual

Search results

Summary of Contents for DH-1000

Reviews:

Related manuals for DH-1000

Brands by name

Popular brands