manualshive.com logo in svg

Champion DH-1000, Installation Manual, Page: 12 / 80

Share
Download
Champion DH-1000 Installation Manual Download Page 12

6

1. Locate the built-in stainless steel booster on the left-side of the dishwasher.

2. Connect a 3/4” NPT hot water supply to the dishwasher at the line strainer.

Installation Guide _____________

;

Water Connection  DH-1000

Dishwasher temperature
and water pressure requirements:

140°F/60°C minimum) for 40° F/22° C rise booster

(35 psi/241 KPa static pressure)

7-10 psi/63-69Kpa flow pressure

(110°F/43°C minimum) for 70° F/39° C rise booster

(35 psi/241 KPa static pressure)
7-10 psi/48-69Kpa flow pressure

Note:

The existing hot water supply lines to the dishwasher must be 3/4" NPT or larger. To the best of
your ability inspect, and verify that all supply piping meets the 3/4" NPT requirement.

 

DH-1000 • Water Connection

Note:

The installing plumber must connect a water supply line to the dishwasher that is equal to or
greater than 3/4" NPT in size with a 3/4" pressure regulating valve ( not  supplied).

Note:

The following components 

are not required

 for proper dishwasher operation, but are

highly recommended

, because they make servicing of the dishwasher much faster.

Install the following components (not supplied) in the hot water supply line:

1) 3/4” or larger water shut-off valve near the machine in the water supply line.
2) ASSE 1010 Water hammer arrestor upstream from the shut-off valve.
3) Pressure gauge 0-60 PSI minimum downstream from the PRV.
4) Temperature gauge 0-180°F/82°C (not supplied) downstream from the gauge.

PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor

Summary of Contents for DH-1000

















































































Reviews:

No comments