Dimensions shown in inches and [millimeters]
Door-type
Low Temperature
Dishwashing Machine
D-LF
D-LF
D
oor-type
SpeciFicationS
Capacities
Racks per hr. (NSF rated)
55
Wash tank US gal.
(imp. gal./liters)
9 (7.5/34)
Wash motor horsepower
1
Water consumption
Gal. per hr. (max. use)
US gal.
(imp. gal./liters)
66 (55/248)
Gal. per rack
US gal.
(imp. gal./liters)
1.2 (0.96/4.4)
Temperatures °F/°C
Wash
140/60
Rinse
140/60
Heating
Tank heat, electric (kW)
4.7
Time cycle in seconds
Wash
45
Dwell
1
Rinse
14
Total cycle
60
Inside Tracks
2-7/8" [73]
5-1/4" [133] Min.
FRONT
20-1/8"[511]
5-1/4" [133] Min.
corner configuration
1
13" [330]
3
2
19"
[483]
26"
[660]
2
3
1
[102] 4"
26" [660]
9-1/4"
[229]
19-1/4"
[489]
13-3/4" [343]
plan View
Straight-through
configuration
typical table
construction
24-1/4" [616]
7-1/4" [184]
2-1/8" [54]
1-1/4" [32] Roll
20-7/8" [530]
1-1/8"
[29]
60-1/2" [1537]
8-7/8" [225]
A
A
11" [279]
2
3
1
84" [2134]
Door
Removal
75" [1805]
Doors Up
57-1/2" [1461]
Machine
Height
34" [864]
Load
Height
17" [432]
Clearance
17" [432]
Clearance
20-1/4" [511]
Inside Track
2-7/8" [73]
FRONT
5-1/4" [133] Min.
For Electric Heat
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
115/60/1*
48
55
55
208/60/1
35
45
45
240/60/1
37
45
45
208/60/3
20
25
25
240/60/3
21
25
25
480/60/3
9
15
15
575/60/3
7
15
15
Length between table connections:
26"/660 mm
Volume crated:
51 cu. ft./1.45 cu.m.
Shipping weight crated:
325 lbs./148 kg
Warning:
Plumbing and electrical connection should be made
by qualified personnel who will observe all the applicable plumbing,
sanitary and safety codes and the National Electrical Code.
Plumbing Note:
Because of the variation in house-supplied
water and steam pressure, pressure regulating valves
(PRV’s) for incoming water and steam supply are needed. The
PRV’s can be purchased from Champion or obtained locally.
Note:
Water Hammer Arrestor (meeting ASSE-1010
standard or equivalent) to be supplied (by others) in
common water supply line at service connection.
Caution:
Silver, aluminum and pewter are attacked
by sodium hypochlorite (liquid bleach). Champion low
temperature dishwashing machines are designed for
liquid bleach solutions not exceeding 50 ppm.
* 3kW wash tank heater
For Steam Heat
Minimum
Maximum
Supply Ckt. Overcurrent
Elec.
Rated
Conductor
Protective
Specs.
Amps
Ampacity
Device
115/60/1
22
30
30
208/60/1
12
15
15
240/60/1
11
15
15
208/60/3
6
15
15
240/60/3
6
15
15
480/60/3
3
15
15
575/60/3
3
15
15
utilities
1
Electrical:
(See Box)
2
Hot water:
3/4" NPT 140°F/60°C hot water connection.
Flow pressure 20-22 psi. (138-151 kPa).
3
Drain:
2" O.D. connection. Max. flow 15
US gpm (12 imp. gpm/54 lpm.)
3/4" NPT machine return to boiler
a.
Steam Injector Condensate
B.
Steam Coil Condensate
Side View
Front View
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road • Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: 905/562-4618
