![background image](http://html.mh-extra.com/html/champion/continuum/continuum_operating-instructions-and-service-manual_2588650012.webp)
12
OM00720 Continuum Manual Rev 2 010118
OPTIONAL FEATURES
– Heat or Heat/Massage
CHAIR SPECIFICATIONS
Please reference previous chair specification pages for all load and dimensional specifications of
your heat chair. All heat chairs are built to properly handle the specified load for that model chair.
The heater option does
not
change the size or load capability of that model.
Power Requirements
Input: 100-240 VAC, 1.0 A max, 50-60 Hz
Output: 12 VDC, 3.5 A, 42 W
Average Measured Maximum Temperatures
HIGH
105
O
F
MEDIUM
102
O
F
LOW
98
O
F
CAUTION: Placing comfort items in the chair, behind the occupant
’s back or
beneath them will expose them to the heat generated by the system. Unlike the
occupant
’s body, the comfort item may not absorb and dissipate the gen
erated heat;
this may expose the comfort item to temperatures that are higher than noted here and
may trap heat. For that reason items covered in vinyl that are not genuine Champion
accessories or items covered in plastic should not be utilized for this purpose. Damage
to the item or your chair is not covered by your warranty.
RECEIVING NEW CHAIRS
NEW HEAT AND HEAT/MASSAGE CHAIR INSPECTION:
Refer to page 6 on receiving new chairs, along with the following operation procedures.
WARNING: The heat or heat/massage chair must be plugged into a properly
grounded outlet and must not be modified in any way. If the three (3) blade plug does
not fit your outlet, have one installed that meets your local codes. Consult an
electrician if you are unsure that the outlets are properly grounded. Do not use a three
(3) blade plug to a two (2) blade adapter.