EN
3
Charging mode:
1. When the adapter is connected, LED white lights flicker.
2. When full of electricity, the LED lamp shows white.
Working mode:
There is one switch gear, the specific functions are as follows:
1. Double-click the button switch, the indicator light is white, the product runs at full speed. When the
working electricity is low, the indicator light is white flashes for five seconds, the machine stops
running; if the indicator light flashes during the work, it means the battery is fast exhausted.
2. If the stall occurs during the work, the product will stop immediately, and the white light of the indi
cator will start to flash. During the process of flashing the indicator light, to protect the control bo
ard, the product will not respond by pressing the button switch.
3. During the working process, click and press the key switch button, and the machine stops running.
4. The white light is flicker on during the charging process (slow flicker), and the white light is display
ed after the charging is completed. Full power can be operated continuously for 10 times (each
program is set to 30 seconds), each interval is not less than 3 minutes, and rest is required after 5
times.
Operation instruction
BEFORE FIRST USE
• Before using this product for the first time, please use soap to clean the combination of the juice
cup and the blade on the main machine, and dry thoroughly; the main unit should be wiped with a
damp cloth and should not be soaked in water, do not rinse in water.
• Before using the product for the first time, please ensure that the battery is fully charged and
thoroughly clean the parts that come into contact with the food.
• This product has double safety protection. If the main unit is placed separately or the juice cup is
not rotated and installed, press the button switch, the product does not work, and the white indica
tor light blinked for 5 seconds. Only when the main unit and the juice cup are rotated and fixed
in place, you can double-click the “key switch” to start the work, and the working status indicator is
white.
Note:
the lid must be aligned with the white dot on the cup to activate the product.
Use
1. Carrots (apples, pears, etc.) shall be washed, peeled, and nucleated, and cut into small squares of
about 10 cm.
2. Put the cut fruit into the juice cup, add water or milk or other liquid. The total amount of food and
liquid should not exceed the maximum mark (350ml) of the cup (120g grams of fruit, 180g of wa
ter).
3. The main engine is rotated and installed on the juice cup. The main engine and the juice cup are
tightened and installed in place to ensure that the food will not leak out.
4. Double-click the ON/OFF button on the product mainframe twice, turn the product upside down,
hold it in hand, and the product starts to work.
Notera:
• During the working process, click the ON/OFF button once, and the product will stop working imme
diately.
• If the blade is stuck at startup, the product can be placed upright and then placed upside down after
normal startup.
