EN
4
Attaching the steam head
1. Slide the bottom end of main body onto the
steam head (N) until Steam head Spindle (9)
clicks into place.
2. The steam head (N) can be removed from the
Main body by pressing salient point on the
Steam head Spindle
Attaching a cleaning pad
1. Because of barb design at the bottom of ste-
am head (N), just place a micro-fiber cleaning
pad (L) to steam head, they can bond hard.
2. Place the front of your shoe onto the cleaning
pad removal tab and press down firmly.
Attaching Carpet Gilder
1.
Press the micro-fiber cleaning pad (L) with
main body to Carpet gilder (O) by vertical
pressure, until it fits into place.
2. Place the front of your shoe onto the cleaning
pad removal tab and press down firmly, carpet
gilder will remove form steam head.
Operation
1.
Filling the water tank:
Method 1: Open the water tank cup (5) by counter clockwise rotation, fill 360ml water (use
Measuring cup), and then clockwise rotation to close water tank cup (5).
Method 2: Remove the water tank from main body, open the water tank cup (5) by
counter clockwise rotation, fill the water tank from water faucet, and then turn clockwise to
close water tank cup (5).
2.
Install the water tank (7) to main body until it clicks into place.
3.
Plug in the appliance to a grounded outlet.
4.
When switch the appliance on, the indicator lights will turn red at each side of water tank, it
indicates preheating. If the lights do not illuminate, please check the ”troubleshooting”
section for more details.
