EN
3
1. Ensure accessories are correctly installed, juice receptor is below the juice outlet and the pulp
cup is in place.
2. After insert power lines, main machine would provide prompt tone and enter standby state.
3. In order to insert fruits in the feed inlet easily, cut fruits into pieces.
Note:
• Fruits with less juice are not recommended, such as banana, apricot, etc.
• Nuts that would damage motor and juicing screen such as cocoa should not be used.
• Unpeeled fruits such as lemon and grapes should not be juiced before peeling. The core of pine
apple should be removed.
• The product is not applicable for fiber-rich fruit or vegetable, such as sugar cane.
4. Put fruit into feed inlet, push the rod and squeeze fruit with even force.
5. Empty the cup when it is filled with juice before next operation.
6. It is recommended to close juice extracting mouth while juicing mixed fruit, to fully mix fruit juice.
7. Juice in the transparent cylinder should not exceed the maximum capacity value, slowly turn on
juice extracting mouth to prevent juice from flying and spraying.
Note: Keep finger or other object away from the fruit channel in juice machine. If the channel is
stuck, push and clear the channel with push rod or other fruit slice and, if failed, disconnect power
supply, remove fruit slices.
8. If juice cup is filled or juicing is finished, press STOP and when spiral feeding rod stops rotation,
empty juice cup, clean feed cylinder and screener. Juicing period should not exceed 20 minutes,
and, after 2-3 cycles, the product should be cooled down before next cycle.
9. If too much food is found in the product, press down REVERSAL, rotor would operate spirally
10. After use, press down STOP, unplug wires, clean each part (with exception for the main machi
ne), dry it and assemble them, store in a safe place.
Cleaning and maintenance
1. After use, clean each part (with exception for the main machine).
2. Before cleaning, unplug wires and fully cool off main machine.
3. After juicing, remove all parts as per the reverse procedure.
4. After cleaning, dry the product with cloth, install and store it in a dry and safe place.
5. Before flushing the outlet of feed cylinder, pull out the bottom silicon sheet and, after cleaning,
install silicon sheet correctly.
Warning: To prevent scratch, take care of and pay attention to the mesh of strainer.
Storage
1. The product should be kept away from children.
2. Store the product in a safe place.
3. Keep the product in a dry place away from direct irradiation of ultraviolet light.
Operation
