EN
3
Installation Guide
1. Make sure that all the packing materials are removed from the inside of the door.
2. WARNING!
Check the oven for any damage, such as misaligned or bent door, damaged door
seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity
or on the door. If there is any damage, do not operate the oven and contact qualified service
personnel.
3.
This microwave oven must be placed on a flat, stable surface to hold its weight and the hea
-
viest food likely to be cooked in the oven.
4. Do not place the oven where heat, moisture, or high humidity are generated, or near combusti-
ble materials.
5.
For correct operation, the oven must have sufficient airflow. Allow 20cm of space above the
oven, 10cm at back and 5cm at both sides. Do not cover or block any openings on the applian-
ce. Do not remove feet.
6. Do not operate the oven without glass tray, roller support, and shaft in their proper positions.
7. Make sure that the power supply cord is undamaged and does not run under the oven or over
any hot or sharp surface.
8. The socket must be readily accessible so that it can be easily unplugged in an emergency.
9. Do not use the oven outdoors.
Grounding instructions
This appliance must be grounded. This oven is equipped with a cord having a grounding wire with
a grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.
In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an
escape wire for the electric current. It is recommended that a separate circuit serving only the oven
be provided. Using a high voltage is dangerous and may result in a fire or other accident causing
oven damage.
WARNING!
Improper use of the grounding plug can result in a risk of electric shock.
The wires in this cable main are colored in accordance with the following code:
Green and Yellow:
EARTH
Blue:
NEUTRAL
Brown:
LIVE
Radio Interference
Operation of the microwave oven can cause interference to your radio, TV, or similar equipment.
When there is interference, it may be reduced or eliminated by taking the following measures:
1. Clean door and sealing surface of the oven.
2. Reorient the receiving antenna of radio or television.
3. Relocate the microwave oven with respect to the receiver.
4. Move the microwave oven away from the receiver.
5. Plug the microwave oven into a different outlet so that microwave oven and receiver are on
different branch circuits.
Trouble Shooting
Before asking for service, please check below:
• Check to ensure the oven is plugged in securely. If not, remove the plug from the outlet, wait 10
seconds, and plug it in again securely.
