![background image](http://html.mh-extra.com/html/champion/54-series/54-series_operating-instructions-and-service-manual_2588601023.webp)
(22)
OM00REC Recliner Manual REV 8 080119
GENERAL CLEANING - UPHOLSTERY
REGULAR CLEANING:
Remove excess soil with a damp non-abrasive cloth. Use a soft white
cloth and solution of mild liquid soap or water based cleaner and water. Rinse all cleaning agents
thoroughly with water and dry with a soft cloth.
IMPORTANT: For specific cleaning instructions, please see manufacturer’s cleaning
instructions
.
CAUTION: Do not use cleaners marked “for hard non-porous surfaces only” unless
approved by the upholstery manufacturer. Such use may cause surface deterioration.
CAUTION: Pretest any cleaning method or agent in a small hidden inconspicuous
area.
STAIN REMOVAL:
For best results treat all stains immediately. Remove any fluids by blotting
with a clean, colorfast, absorbent cloth. Flush stain with water and dry with clean cloth. Remove
as much of the solid or semi-solid substances as possible using a flat object. After removal,
vacuum thoroughly using the proper attachments before cleaning with an agent. Clean stains or
spots from the edge of the stain working towards the center.
GENERAL CLEANING – PLASTIC TABLE TOPS
CAUTION: Do not use strong solvents such as Picrin
®
or Goof-Off
®
. They will
damage your table top.
CAUTION: Compounds that are safe to use on the vinyl surfaces of your chair may
not be appropriate for cleaning your table top.
It is always easier to clean the table immediately after a spill. When the residue from a spill has
dried on the table, a soft bristle brush may be used to help bring it back into solution. Rinse the
surface with clean water. For residue that is not readily soluble in bleach and water, try hot water
and dish washing liquid. Rinse and use absorbent material to remove as much liquid as possible.
You may also try rubbing alcohol, applying a small amount of alcohol with a cloth, ribbing the
dried-on residue. It may take several applications to dissolve the residue.
GENERAL INFECTION CONTROL
INFECTION CONTROL:
A solution of up to 10% bleach and water may be used. After using
bleach solution be sure to rinse area with a soft cloth moistened with clear water and let dry.
Bleach solutions not completely removed can fade the material. Never use bleach in full strength
to clean these materials. Information in regard to the strength of bleach solution from the vinyl
manufacturer is meant to establish an upper limit beyond which damage might occur.