![background image](http://html.mh-extra.com/html/champion/54-series/54-series_operating-instructions-and-service-manual_2588601011.webp)
(10)
OM00REC Recliner Manual REV 8 080119
OPERATING INSTRUCTIONS
WARNING: DO NOT put your hands where you cannot see. To assist a patient in
closing the leg rest; place your palm against the upholstered top surface and press
downward in the center well away from the recline mechanism at the sides.
To return to a full upright position from “TV” position:
Apply pressure to the leg rest until the leg rest returns to the locked position and the back
is in the upright position.
Trendelenburg Option
We recommend that health care professionals who will be using this chair become thoroughly
acquainted with the recliner and the Trendelenburg option prior to its use with a patient.
CAUTION: Operation of the Trendelenburg option must be in the proper sequence
to be effective. First move through the recline functions then actuate the trend option.
CAUTION: The Trendelenburg release must be fully actuated and held for the chair
to operate properly.
CAUTION: Once the chair has been placed in full Trendelenburg position, it is
possible to adjust the Trendelenburg position upward ONLY after returning the chair
from Trendelenburg to “TV” position, and back through full recline; STOPPING THE
CHAIR AT THE DESIRED POSITION WHILE ON THE WAY DOWN.
To actuate the Trendelenburg option:
1.
Follow the operating instructions to place the chair in a full recline position.
2.
Locate the Trendelenburg actuator release lever on the chair back.
3.
Grasp the push handle,
“pull and hold”
the Trendelenburg release lever. Lower the chair
and occupant to the Trendelenburg position. Release the actuator to lock the chair back in
position. Should you choose to place the chair in a position short of full Trendelenburg,
stop the chair back at the desired position and release the actuator while in motion.
To return from Trendelenburg option:
1.
“
Pull and hold
” the Trendelenburg actuator release lever as you lift the chair back to the
“TV position”.
Release the actuator to lock the back in position.
2.
The chair may now be actuated into any of the standard chair positions according to the
operating instructions
.