Champion 44 WS Technical Manual Download

Page: 10 / 189

INTRODUCTION

Welcome to

Champion

...and thank you for allowing us to take care of your dishwashing needs.

This manual covers several models. Model numbers are shown on the front cover.

Your machine has been completely assembled, inspected, and thoroughly tested at our factory
before it was shipped to your installation site.

This manual contains:

• Warranty information

• Operation and cleaning instructions

• Maintenance instructions

• Troubleshooting guide

• Basic service information

• Replacement parts lists

• Electrical schematics

Complete and return your warranty registration card within ten (10) days after the installation of
your machine.

All information, illustrations and specifications contained in this manual are based upon the latest
product information available at the time of publication.

Champion

constantly improves its prod-

ucts and reserves the right to make changes at any time or to change specifications or design with-
out notice and without incurring obligation.

For your protection, factory authorized parts should always be used for repairs.

Replacement parts may be ordered from your

Champion

authorized service agency. When

ordering parts, please supply the model number, serial number, voltage and phase of your
machine, the part number, part description, and quantity.

Summary of Contents for 44 WS






























































































































































































Search results

Summary of Contents for 44 WS

Reviews:

Related manuals for 44 WS

Brands by name

Popular brands

Champion 44 WS, Technical Manual

Search results

Summary of Contents for 44 WS

Reviews:

Related manuals for 44 WS

Brands by name

Popular brands