Champion 44 LT Installation And Operation Manual Download

Page: 19 / 146

Dishwasher access doors are equipped with a door safety switch that automatically

stops the dishwasher pumps and conveyor drive if a door is raised while the dishwasher

is running. In addition, the dishwasher will not start if a door is left open.

1. If the dishwasher is running and a door is raised, then lighted GREEN START

pushbutton goes out and the pumps and conveyor drive stop.

2. Check the interior of the dishwasher for any dish racks still in the machine.

These dish racks must be washed again to ensure they are washed and sanitized

completely.

3. To restart the dishwasher, make sure all doors are closed, then push the GREEN

START pushbutton.

The illustrations below and on the proceeding pages illustrate how to install and

remove the spray arm assemblies and scrap screens.

Spray arm and Scrap Screen Installation

Removing the lower spray arm

assembly

Installation

Door Safety Switches

Summary of Contents for 44 LT



















































































































































Search results

Summary of Contents for 44 LT

Reviews:

Related manuals for 44 LT

Brands by name

Popular brands

Champion 44 LT, Installation And Operation Manual

Search results

Summary of Contents for 44 LT

Reviews:

Related manuals for 44 LT

Brands by name

Popular brands