![background image](http://html.mh-extra.com/html/champion/201107/201107_operators-manual_2588415019.webp)
201107 - 1600 ExPANSiON BATTERy
ASSEMBLy
19
Using included Easy Connect DC Solar
Charge Harness
(For solar panels with MC4 connector)
NOTiCE
The Power Station’s charging wattage is rated at 440W.
However, depending on environmental conditions and solar
panel efficiency, often times it will be necessary to use more
than 440W of solar panels to achieve actual 440W of charging
energy. Adding more than 440W of solar panels will not
damage the battery.
The charging power and rate is reduced as the battery level
gets closer to 100% to safely charge the internal battery.
It is important to adjust your solar panels to face the sun as
best as possible throughout the day to achieve maximum
charging efficiency.
For example, on a cloudy day, three 150W (450W total) rated
solar panels may only produce 250-350W of charging power.
It may be necessary, and will not harm your Power Station to
add more solar panels to the harness until you reach 440W of
charging power.
1. Connect the APP end of the Easy Connect DC Solar Charge
Harness (included) to the APP input port on the back of the
charging module.
2. Connect up to three solar panels using the MC4 connectors.
3. If not using all 3 connections, you can remove any spare
connectors and store in a safe and dry location.
4. Connect charging module to Expansion Battery.
Recommended Solar Panels
NOTiCE
Often times it will be necessary to use more than 440W of
solar panels to achieve actual 440W of charging energy.
Adding more than 440W of solar panels will not damage the
battery.
Always use panels with the same nominal voltage rating when
using multiple solar panels.
Model
Watts
Connector Type
Renogy RNG-100D-SS
100
MC4
Renogy Solar Panel 200
Watt 12 Volt
200
MC4
Bluetti SP120
120
MC4
Bluetti SP200
200
MC4
ECOFLOW EFSOLAR
160W
160
MC4