200914 - 4250W DUAL FUEL OPEN FRAME INVERTER
IMPORTANT SAFETY INSTRUCTIONS
11
Quickstart Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
10W-30
1
2
3
5
6
1
2
4
2742-L-OP-A
7
Starting the Engine- Manual Start
DANGER
Move generator outside and far away from windows,
doors and intake ventilation covers.
1.
Check oil level.
Recommended oil is 10W-30.
2.
Check gasoline level.
When adding gasoline, use a minimum octane rating of 87
and an ethanol content of 10% or less by volume.
3. Turn the fuel selector dial to gasoline
“RUN”
position.
4. Move choke lever to
“CHOKE”
position.
5. Pull the recoil cord.
6. Move the choke lever to
“RUN”
position.
7. Plug in desired device.
Stopping the Engine
1. Turn off and unplug all connected electrical loads.
2. Turn the fuel selector dial to the
“OFF” or STOP
position.
For adding fuel and starting the engine with LPG see
Add Fuel:
Propane (LPG)
in
Assembly
section and
Starting the Engine:
Propane (LPG)
in the
Operation
section.
