![background image](http://html1.mh-extra.com/html/champion/100624/100624_operators-manual_2588761024.webp)
24
100624 - 9 TON FULL BEAM LOg SPLiTTER
MAiNTENANCE
A
8. Remove dipstick and add up to 192.7 fl. oz. (5.7 L) of
hydraulic oil - ISO 32. Check the hydraulic oil level using
dipstick. Oil level should be between the two marks on the
dipstick.
MAX
MIN
9. Start engine and purge air from hydraulic system. Extend and
retract the cylinder to purge air from the hydraulic system.
Cylinder motion should be smooth and continuous
Maintenance Schedule
Follow the service intervals indicated in the following maintenance
schedule.
Service your log splitter more frequently when operating in
adverse conditions.
Contact our Technical Support Team at 1-877-338-0999 to locate
the nearest CPE certified service dealer for your log splitter or
engine maintenance needs.
EVERY 8 hOURS OR DaILY
Check engine and hydraulic oil levels
Clean around air intake and muffler
FIRST 5 hOURS
Change engine oil
EVERY 50 hOURS OR EVERY SEaSON
Clean air filter
Change engine oil and hydraulic oil if operating under
heavy load or in hot environments
EVERY 100 hOURS OR EVERY SEaSON
Change oil
Clean/adjust spark plug
Check/adjust valve clearance*
Clean spark arrestor
Clean fuel tank and filter*
Change hydraulic oil
EVERY 250 hOURS
Clean combustion chamber*
EVERY YEaR
Inspect wheel bearings and repack bearing grease as
needed.
EVERY 3 YEaRS
Replace fuel line*
* To be performed by knowledgeable, experienced owners or CPE certified service
centers.