![background image](http://html.mh-extra.com/html/champion/100204/100204_manual_2588433008.webp)
16.
Loosen the choke cable clamp screw and
loosen the cable wire clamp using a
7mm and 8mm wrench. Remove choke
cable from Pinch bolt and allow cable to
lay loosely so we can remove front panel
in later step.
17.
If unit is a dual fuel, take note of which
wires go to which terminals. We suggest
you take a picture then disconnect the
spade terminals. There are 6
connections and we only use 4 so we
recommend you Take a Picture!