6
100158
ENGLISH
Power Panel
(1) Fuel Valve Knob
(2) Choke
(3) Economy Control Switch
(4) Ground Terminal – Consult an electrician for local
grounding regulations.
(5) 12V DC Outlet*
(6) Circuit Breaker (Push-button) – Protects the
generator against electrical overload.
(7) Parallel Outlets – used for parallel operation.
(8) 120 Volt AC, 20 Amp Duplex (GFCI 5-20R) –
May be used to supply electrical power for the
operation of 120 Volt AC, 20 Amp, single phase
60 Hz electrical loads.
(9) 120 Volt AC, 30 Amp Receptacle (NEMA TT-30R)
–
May be used to supply electrical power for the
operation of 120 Volt AC, 30 Amp, single phase
60 Hz electrical loads.
CONTROLS AND FEATURES
13
9
6
3
4
5
8
2
1
(10) Oil Warning Light – Check oil level when this light
turns on. Engine will not run when indicator is lit.
(11) Overload Indicator Light – This light turns ON
when the generator is overloaded and will cut
power to the receptacles.
(12) Output Light – Remains ON during normal
operating conditions. Shuts OFF when generator is
overloaded.
(13) Engine Switch
*Warning: Do not operate a device while it is plugged into
the 12V DC outlet. Prolonged exposure to engine exhaust
can cause serious injury or death. While charging a device
do no place on the exhaust side of the generator. Extreme
heat caused by exhaust can damage the device, and cause a
potential fire hazard.
7
12
10
11
6