Champion Power Equipment CSA40036, Owner'S Manual And Operating Instructions

Page: 10 / 28

Controls and Features
6 Rev CSA40036-20080528
Power Panel
(1) Ignition Switch – Flip switch to the
“On” position to start the generator. Flip to
the “Off” position to turn off the generator.
(2,3) Circuit Breakers – Protects the
generator against electrical overload.
(4) Voltmeter – Displays the output
voltage of the generator.
(5) 120 V 30 A Twist-Lock – Protected by
a 25 A flip-to-reset circuit breaker. This
receptacle powers 120 Volt AC, 60 Hz, single
phase loads requiring up to 25 A or 3000
Watts of power.
(6) 120/240 V 30 A Twist-Lock –
Protected by a 25 A flip-to-reset circuit
breaker. This receptacle powers 240 Volt
AC, single phase loads requiring 5500
Watts, 120 Volt AC, 60 Hz, single phase
loads requiring up to 25 A or 3000 Watts of
power
(7) 120 V 20 A Duplex – This duplex is
protected by a 20 A flip-to-reset circuit
breaker to operate 120 Volt AC, single phase,
60 Hz loads requiring up to 20 A 0r 2400
Watts of power.
(8) Ground Bolt - Consult an electrician
for local grounding regulations.