Description
Portable Wireless IrDA Printer
Power Switch
The Power switch, located on the left side of the printer, is used to turn the unit
ON and OFF.
Indicator LEDs
• Power LED (Green):
Glows steady when the printer is turned ON.
• Error LED (Red):
Flashes once-per-second when the printer is out of paper;
the buffer is full; or when the print head temperature exceeds 140°F (60°C).
This LED will also flash one time when the printer is placed into its set-up
mode (refer to Section
Set-Up Mode
).
Pushbuttons
• FEED:
- Momentarily press this button to advance the paper. Press and hold down to
feed paper continuously.
- This button in conjunction with the ON/OFF switch is used to start the
printer’s self test function (refer to Section
Self Test
).
- When the printer is in its set-up mode, this button is used to modify the
selected printer parameter (refer to Section
Set-Up Mode
).
• SEL:
- Used in conjunction with the ON/OFF switch to place the printer into its set-up
mode (refer to Section
Set-Up Mode
).
- With the printer in its set-up mode, use this button to select the desired printer
parameter.
Sensors
• Paper Out:
When the paper roll runs out, the printer is disabled to
prevent damage to the print head. This condition is indicated by the Error
LED flashing red.
• Infrared Sensor:
Located at the front of the printer, this sensor receives
the infrared output of an external instrument.
２
Instruction NewHany
