Chameleon Controls WKPAD2, Manual, Page: 8 / 12

Samples:
CHANGE DEFAULT PASSWORD TO “1234”
1. With the WKPAD2 as default setting, the passwords is “8888”. Sequentially press buttons “ PIN +
8888” , (current password) WKPAD2 checks if the password is correct.
2. Continue press button “ PIN + 1234” (new password), the WKPAD2 record the new password.
3. Repeat again, press “ PIN + 1234” , WKPAD2 confirms both passwords match, WKPAD2 emits 1
long beep and the passwords has changed to “1234” successfully.
315MHz
CCCC + OK
Independent remote code
for Channel 2#
37
LIFTMASTER
Lobas
390MHz
CCCC + PIN
Independent remote code
for Channel 1#
CCCC + OK
Independent remote code
for Channel 2#
38
LIFTMASTER
Motorlift
433.92MHz
CCCC + PIN
Independent remote code
for Channel 1#
CCCC + OK
Independent remote code
for Channel 2#
39
LINEAR
433.92MHz
CCCC + PIN 0x01 Channel 1#
CCCC + OK 0x02 Channel 2#
40
V2
433.92MHz
CCCC + PIN 0x01 Channel 1#
CCCC + OK 0x02 Channel 2#
41
V2
868MHz
CCCC + PIN 0x01 Channel 1#
CCCC + OK 0x02 Channel 2#
42
SOMMER
868MHz
CCCC + PIN 0x02 Channel 1#
CCCC + OK 0x04 Channel 2#
43
CARDIN
433.92MHz
CCCC + PIN 0x02 Channel 1#
CCCC + OK 0x04 Channel 2#
44
SOMMER
433.4MHz
CCCC + PIN 0x02 Channel 1#
CCCC + OK 0x04 Channel 2#
45
CARDIN
434MHz
CCCC + PIN 0x02 Channel 1#
CCCC + OK 0x04 Channel 2#