Before the keypad can work with the receiver, the remote brand must be selected by DIP switch and the
remote code must be learnt into the receiver first. The brand selection is shown on table1.
CHANNEL 1
After the brand have been selected, sequentially press key
“OK + CCCC + PIN”
(remember
CCCC
is
current password, keypad sends necessary code into receiver and channel 1# is learn successfully.
CHANNEL 2
Once DIP has been selected, press key
“OK + CCCC + OK”
(
CCCC
is current passwords), keypad sends
necessary code into receiver and channel 2# is learnt successfully.
3. REMOTE WORK
The keypad can work as 2 channels remote with the button
“PIN”
or
“OK”.
CHANNEL 1
Sequentially press buttons
“CCCC + PIN”
(
CCCC
is current password), the keypad works as channel 1
CHANNEL 2
Press buttons
“CCCC + OK”
, the WKPAD2 works as channel 2. The keypad sends corresponding brand
and button code to receiver for work.
The button codes show as table1.
4. TIPS
1. All buttons must be pressed sequentially within 1s.
2. WKPAD2 beeps once every button is pressed.