CHA RXL
Page 6
e.
Camera Mount Socket.
The Camera Mount Socket is a standard 1/4” x 20
threaded camera socket, located on
the bottom of the Loop Preamplifier Unit, used to attach the CHA RXL to a heavy-duty Camera Tripod. An
optional mount
can convert the 1/4” x 20 camera socket to a 3/8”
x 24 antenna stud for use with optional
Chameleon Antenna
TM
antenna mounts (see accessories list).
f.
Mounting Bracket Connections.
The two Mounting Bracket Connections are used to attach the Mounting
Bracket to the Preamplifier Unit.
g.
Mounting Bracket.
Mounting Bracket, shown in plate (5) is used to mount the CHA RXL to a TV-style 1 ¼ inch
antenna mast. The Mounting Bracket is not used if the CHA RXL is mounted on a camera tripod or placed on a
table top.
Plate 5. CHA RXL Mounting Bracket and Hardware.
h.
Preamplifier Mounting Holes.
The two Preamplifier Mounting Holes are used when attaching the Mounting
Bracket to the Preamplifier Unit with two Allen Head screws.
i.
U-Bolt Holes.
The four U-Bolt Holes are used to attach the Mounting Bracket to a TV-style mast with a pair of
¼” D X 3” L X 1 ¾”
W U-Bolts.
j.
BIAS-T Unit.
The BIAS-T Unit is used to inject 12V DC power into the Coaxial Cable to provide power to the
electronic preamplifier. The BIAS-T Unit is not weather resistant and must be installed indoors or otherwise
protected from the elements.
k.
Radio Connection.
The Radio Connection is a UHF Socket (SO-239) used to connect a coaxial cable jumper from
the BIAS-T Unit and the radio receiver.
l.
Intentionally Not used.
