Chameleon Antenna CHA LRT, Operator'S Manual, Page: 8 / 11

CHA LRT Page 8
13. Press the “ << ” or “ >> ” button on the top panel of the Remote Tuner Unit (A) to rotate the Motor
Assembly ferrule until the second shaft set screw is aligned with the Motor Assembly (B) flange
channel, see plate (7).
14. Insert the supplied Allen Wrench (G) into the Motor Assembly (B) flange channel and tighten the
second shaft set screw.
Slide the “ POWER ” switch to “ OFF ” .
DO NOT adjust, tighten, or loosen the set screw on the shaft of the Motor Assembly, see plate (7).
15. Tighten Machine Screws (E) & (F), as shown in plate (8).
16. This completes the installation procedure for the Loop Remote Tuner.
Plate 8. Completed Loop Remote Tuner.