CHA LRT
Page 5
3.
Remove the two existing machine screws from the front of the Tuning Unit, as shown in plate (3).
Set aside the Tuning Knob and original machine screws - in case you ever want to restore the
original manual Tuning Knob.
Plate 3. Existing Front Machine Screw Removal.
4.
Place Aluminum Bracket (D) over front of Tuning Unit, as shown in plate (4).
5.
Install two Long Machine Screws (E) with washers in the holes on top of the Aluminum Bracket,
as shown in plate (4). Do not completely tighten the screws.
Plate 4. Aluminum Bracket Installation.