Accessories Available for your Opener
LOCK
LIGHT
38
8704C
41A5281
935C
7702C
953C
Outside Quick Release:
Required for a garage with NO
access door.
8 Foot Rail Extension Kit:
To allow an 8 foot door to open
fully.
Extension Brackets:
(Optional) For safety sensor
installation onto the wall or floor.
To order call: 1-800-654-4736
Motion Detecting Control Panel:
Multi-function door control with motion
sensor that automatically turns opener
lights on for 5 minutes when it detects a
person entering the garage. Sensor can
be easily deactivated when desired.
SECURITY
✚
Multi-Function
Mini Remote Control:
With key ring and Velcro
fastening strip.
SECURITY
✚
Multi-Function
Remote Control:
Includes visor clip.
SECURITY
✚
Keyless Entry:
Enables homeowner to operate garage door opener from outside by
entering a password on a specially designed keyboard. Also can add a
temporary password for visitors or service persons. This temporary
password can be limited to a programmable number of hours or entries.
956C
940C
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Multi-Function door control:
1.
With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the password, then
press and
hold the Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the “Smart” (learn) button on
the opener panel. After the opener lights flash,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
Setting a Temporary Password
In addition to your personal entry password which
works at all times, a 4-digit temporary password can
be added for the convenience of visitors or service
persons.
This allows authorized persons a way to gain
temporary access.
After a programmed number of hours or number of
accesses, this temporary password expires and will
no longer open the door. The temporary password
can be used to
close the door even after it has
expired. To set a temporary password:
1. Press the four buttons for your personal entry
password (not the last temporary password), then
press and hold the
✽
button.
The opener light will blink three times. Release the
button.
2. Press the temporary 4-digit password you have
chosen, then press Enter.
The opener light will blink four times.
3. To set the number of
hours this temporary
password will work, press the number of hours
(up to 255), then press
✽
.
OR
3. To set the number of
times this temporary
password will work, press the number of times
(up to 255), then press #.
The opener light will blink once when the temporary
password has been learned.
Test by pressing the four buttons for the temporary
password, then press Enter. The door should move. If
the temporary password was set to a certain number
of openings, remember that the test has used up one
opening.
To clear the temporary password, repeat steps 1-3,
setting the number of hours or times to 0 in step 3.
