38
To Add the Keyless Entry
We recommend that you program your password before
you install the Keyless Entry. You will not need
assistance, and you can test the reception at the
mounting location before installation.
If you have a Multi-Function door control:
1.
With the door closed, enter the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from 0 to 9
(a number can be used more than once, for example,
4, 0, 4, 1).
2. Press the four buttons for the password, then press
and
hold the Enter button. The indicator light on the
door opener panel will blink.
3. Press and release the “Smart” (learn) button on the
opener panel. After the opener lights flash, release
the Enter button.
Test by pressing the the password, then press Enter.
The door should begin to move.
Setting a Temporary Password
In addition to your personal entry password which works at
all times, a 4-digit temporary password can be added for
the convenience of visitors or service persons.
This allows authorized persons a way to gain temporary
access.
After a programmed number of hours or number of accesses,
this temporary password expires and will no longer open the
door. The temporary password can be used to
close the door
even after it has expired. To set a temporary password:
1. Press the four buttons for your personal entry password
(not the last temporary password), then press and hold
the
✽
button.
The opener light will blink three times. Release the button.
2. Press the temporary 4-digit password you have chosen,
then press Enter.
The opener light will blink four times.
3. To set the number of
hours this temporary password will
work, press the number of hours (up to 255), then
press
✽
.
OR
3. To set the number of
times this temporary password will
work, press the number of times (up to 255), then press #.
The opener light will blink once when the temporary
password has been learned.
Test by pressing the four buttons for the temporary
password, then press Enter. The door should move. If the
temporary password was set to a certain number of
openings, remember that the test has used up one opening.
To clear the temporary password, repeat steps 1-3, setting
the number of hours or times to 0 in step 3.
LOCK
LIGHT
LOCK
LIGHT
Accessories Available for your Opener
7702C
953C
956C
SECURITY
✚
Multi-Function
Remote Control:
Includes visor clip.
Outside Quick Release:
Required for a garage with NO
access door.
SECURITY
✚
Multi-Function
Mini Remote Control:
With key ring and Velcro
fastening strip.
8 foot Rail Extension Kit:
To allow an 8 foot door to open
fully.
7704C
10 foot Rail Extension Kit:
To allow a 10 foot door to open
fully.
8710C
945C
Multi-Function Door Control
Panel:
Provides a Lock Feature which
prevents operation of garage
door opener from portable
remotes and a Light Feature for
constant light.
940C
SECURITY
✚
Keyless Entry:
Enables homeowner to operate
garage door opener from outside
by entering a password on a
specially designed keyboard. Also
can add a temporary password
for visitors or service persons.
This temporary password can be
limited to a programmable
number of hours or entries.
Motion Detecting Control Panel:
Multi-function door control with
motion sensor that automatically
turns opener lights on for 5 minutes
when it detects a person entering
the garage. Sensor can be easily
deactivated when desired.
935C
