28
Care of Your Opener
LIMIT AND FORCE ADJUSTMENTS:
Weather conditions may cause
some minor changes in door
operation requiring some
re-adjustments, particularly
during the fi rst year of
operation.
Pages 23 and 24
refer to the limit and
force adjustments. Only a
screwdriver is required. Follow
the instructions carefully.
Repeat the safety reverse test (Adjustment Step 3,
page 25) after any adjustment of limits or force.
NOTICE: To comply with FCC and or Industry Canada (IC) rules,
adjustment or modifi cations of this receiver and/or transmitter are
prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
MAINTENANCE SCHEDULE
Every Month
• Manually operate door. If it is unbalanced or binding,
call a trained door systems technician.
• Check to be sure door opens and closes fully. Adjust
limits and/or force if necessary. (See pages 23
and 24.)
• Repeat the safety reverse test. Make any necessary
adjustments. (See Adjustment Step 3.)
Every Year
• Oil door rollers, bearings and hinges. The opener does
not require additional lubrication. Do not grease the
door tracks.
Every Three to Four Years
• Use a rag to wipe away the existing grease from the
garage door opener rail. Reapply a small layer of white
lithium grease to the rail.
THE REMOTE CONTROL BATTERY
The lithium battery should
produce power for up
to 5 years. To replace
battery, use the visor clip
or screwdriver blade to pry
open the case as shown.
Insert battery positive side
up (+).
Dispose of old battery
properly. Replace the battery
with only 3V2032 coin cell batteries.
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
To reduce risk of fi re, explosion or chemical burn:
• Replace ONLY with 3V2032 coin batteries.
• DO NOT recharge, disassemble, heat above 100° C
(212° F) or incinerate.
FORCE CONTROLS
LIMIT CONTROLS
Battery
positive
side
up (+)
