9
INSTALLATION STEP 2
Install the Header Bracket
You can attach the header bracket either to the wall
above the garage door, or to the ceiling. Follow the
instructions which will work best for your particular
requirements.
Do not install the header bracket
over drywall. If installing into masonry, use
concrete anchors (not provided).
WALL HEADER BRACKET INSTALLATION
• Center the bracket on the vertical centerline with
the bottom edge of the bracket on the horizontal
line as shown (with the arrow pointing toward the
ceiling).
• Mark the vertical set of bracket holes (do not use
the holes designated for ceiling mount). Drill 3/16"
pilot holes and fasten the bracket securely to a
structural support with the hardware provided.
Lag Screw
5/16"-9x1-5/8"
HARDWARE SHOWN ACTUAL SIZE
Lag Scre
w
s
5/16"x9x1-5/
8
"
Highest Point of
Garage Door Tra
v
el
Vertical
Centerline of
Garage Door
Header
W
all
Garage
Door
UP
CEILI
N
G MOU
N
T O
N
LY
W
all Mo
u
nting Holes
Optional
W
all Mo
u
nting Holes
The nail hole is for
positioning only.
Yo
u
m
u
st
u
se lag scre
w
s
to mo
u
nt the header
b
racket.
UP
CE
ILI
N
G M
OU
N
T O
N
LY
Door Spring
Header
Bracket
2x4
Str
u
ct
u
ral
S
u
pport
Vertical
Centerline of
Garage Door
Horizontal
Line
UP
CEILI
N
G MOU
N
T O
N
LY
Ceiling Mo
u
nting Holes
The nail hole is for
positioning only.
Yo
u
m
u
st
u
se lag scre
w
s
to mo
u
nt the header
b
racket.
UP
Lag Scre
w
s
5/16"-9x1-5/
8
"
Garage Door
Vertical
Centerline
of Garage Door
Header
W
all
– Finished Ceilin
g
–
Header
Bracket
6" (15 cm)
Maxim
u
m
Vertical
Centerline
of Garage Door
Door
Spring
CEILING HEADER BRACKET INSTALLATION
• Extend the vertical centerline onto the ceiling as
shown.
• Center the bracket on the vertical mark, no more
than 6" (15 cm) from the wall. Make sure the arrow
is pointing toward the wall. The bracket can be
mounted flush against the ceiling when clearance
is minimal.
• Mark the side holes. Drill 3/16" pilot holes and
fasten bracket securely to a structural support with
the hardware provided.
